Expansion Joints JHR 5.35
Parking Joints
Parking Floor Expansion Joint
MATERIAL: Rubber
Steel
COLOUR: Black
MODEL: FLAT
CHARACTERISTICS:
- Highly durable, suitable for heavy light vehicle traffic
- For opening joints up to 600 mm
- Reinforced with a steel plate and rubber finish
Floor expansion joints for car parks, access ramps, esplanades, and any other place with or without low-speed vehicle traffic. Widths available for openings up to 600 mm. Profile reinforced with a steel plate and rubber finish to absorb noise pollution due to passing vehicles.
Description
Shipping & Delivery
Related products
Expansion Joints JHR 5.08
Floor joints with insert
Aluminum Floor Expansion Joint
MATERIAL: Aluminium
Nitrile
COLOUR: Black
Grey
RAL shades
MODEL: Flat and Angle
CHARACTERISTICS:
- Reinforced Floor Expansion Joint
- Special for large widths
- For opening joints up to 125 mm
Wide-width floor expansion joint for outdoor and indoor use made of aluminium angles and 2 interchangeable flexible nitrile inserts for any type of finish: expansion joint for slabs, screeds, tiles, etc.
Expansion Joints JDV 4.07
Special Vertical Expansion Joint for Large Multidirectional Movements
Seismic Vertical Expansion Joint
MATERIAL: Aluminium
EPDM
COLOUR: Black
Grey
MODEL: Main course only
CHARACTERISTICS:
- Seismic expansion joint
- Vertical installation of façade, wall and ceiling
- For opening joints up to 600 mm
Vertical expansion joint for facades, walls and ceilings for opening joints up to 600 mm.
Allows you to absorb large multidirectional movements.
Expansion Joints JDV 4.06
Vertical expansion joint for walls, facades and ceilings
MATERIAL: Aluminium
Nitrile
COLOUR: Black
Grey
MODEL: Flat and Angle
CHARACTERISTICS:
- For opening joints up to 60 mm
- Vertical installation of façade, wall and ceiling
- Available from stock
The expansion joint for walls, facades and ceilings consists of two raw aluminium angles and a flexible nitrile insert. The side angles are covered with cellular foam that compensates for unevenness in the surfaces.
Expansion Joints JDV 4.04
Galvanized Steel Exterior and Interior Wall Expansion Joint
Steel expansion profile with nitrile insert
MATERIAL: Galvanized steel
Nitrile
COLOUR: Black
Grey
RAL shades
MODEL: Flat and Angle
CHARACTERISTICS:
- For 30 to 50 mm opening joints
- Laying under plaster
- Recessed vertical expansion joint
Vertical expansion joints in galvanized steel for facades, walls and ceilings composed of two pre-drilled recessed galvanized steel angles and an interchangeable flexible nitrile insert to absorb small multidirectional movements.
Expansion Joints JDV 4.02
Vertical expansion joint for facades, walls and ceilings
Seismic expansion joint for vertical application
MATERIAL: Aluminium
COLOUR: Natural
RAL shades
MODEL: Flat and Angle
CHARACTERISTICS:
- For opening joints from 40 to 200 mm
- Seismic expansion joint
- Vertical installation of façade, wall and ceiling
Seismic vertical expansion joint in anodized aluminum composed of pre-drilled angles and a central part that allows ample movements to be absorbed.
It is ideally suited for application on walls, facades and ceilings. Available in 3 ml length.
Expansion Joints Flexible Blanking Profile PSR
Flexible sealing profiles
MATERIAL: Nitrile
PVC
COLOUR: Black
Grey
RAL shades
MODEL: Main course only
CHARACTERISTICS:
- Cost-effective product, quick installation
- For non-circulatable horizontal and vertical joints
- For opening joints between 10 and 90 mm
Recessed flexible blanking profiles are ideal for the quick and economical construction of vertical joints, exterior or interior, or ceiling joints.
PSRs have a "cap" shaped upper part that provides coverage and hides any irregularities that the joint may have.
Expansion Joints GASKET COVER CJP
Joint Covers & PSO
MATERIAL: Aluminium
galvanized steel
stainless steel
COLOUR: RAL shades
MODEL: Flat and Angle
CHARACTERISTICS:
- For new work and renovation
- For opening joints up to 500 mm
- Possibility of tailor-made, contact us
CJP's folded aluminium and stainless steel joint covers are designed to protect and cover the joints of facades, walls, ceilings and floors.
Economical, easy and quick to install, pre-drilled or not, floor or wall joint covers are used in new work and renovation to cover expansion joints up to 500 mm of opening.
Expansion Joints GASKET COVER CJ Brass
Brass joint cover
MATERIAL: Brass COLOR: raw press MODEL: Dish only CHARACTERISTICS:- Aesthetic, decorative and economical.
- Easy and quick to install, without drilling or gluing.
- For opening joints from 10 to 60 mm.