Tiles & Marbles Stones
Expansion Joints JHR 6.26
All metal floor joints
Special Seismic Ground Expansion Joint
MATERIAL:Â Aluminium
COLOUR:Â Natural
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Seismic expansion joint
- Special for resilient floors
- For opening joints between 50 and 200 mm
Seismic ground expansion joint allowing large movements. Specially designed for use with soft floors. It consists of angles and a central aluminium plate with a 3 mm reserve, allowing it to absorb expansion, contraction, as well as vertical and shear movements.
Used with flexible floors, it is particularly suitable for hospitals, nursing homes, schools, shops,
Expansion Joints JHR 6.24
All metal floor joints
Seismic Stainless Steel Ground Expansion Joint
MATERIAL:Â Stainless steel
COLOUR:Â Natural
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Seismic expansion joint
- Special very large movements: 50%
- For opening joints between 50 and 200 mm
Seismic ground expansion joint allowing large movements. Consisting of aluminium bases and stainless steel uppers, it absorbs expansion, contraction, vertical and shear movements.
Can be used for any type of finish: expansion joint for concrete, screed, tiles, etc.
Expansion Joints JHR 6.22
All metal floor joints
Aluminum Seismic Ground Expansion Joint
MATERIAL:Â Aluminium
COLOUR:Â Natural
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Seismic expansion joint
- Special large movements: 50%
- For opening joints between 50 and 150 mm
Seismic high-motion ground expansion joint consisting of angles and an aluminum center plate to absorb expansion, contraction, as well as vertical and shear movements.
Can be used for any type of finish: concrete, screed, tiles, etc.
Expansion Joints JHR 6.20
All metal floor joints
Special Wide-Width Floor Expansion Joint
MATERIAL:Â Aluminium
COLOUR:Â Natural
MODEL:Â Flat and Angle
CHARACTERISTICS:
- All-metal floor expansion joint
- Special for large widths
- For opening joints between 135 and 340 mm
All aluminum seismic floor expansion joint for exterior and interior. The aluminium inner parts slide between them, thus absorbing three-dimensional movements: horizontal, vertical and shear. Interchangeable aluminium tops with the option of a nitrile levelling strip.
Can be used for any type of finish: expansion joint for concrete, screed, tiles, etc.
Expansion Joints JHR 6.18
All metal floor joints
Special Floor Expansion Joint Large Multidirectional Movements
MATERIAL:Â Aluminium
COLOUR:Â Natural
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Seismic expansion joint
- Special for large widths
- For opening joints between 135 and 340 mm
All aluminum seismic floor expansion joint for exterior and interior. The aluminium inner parts slide between them, thus absorbing three-dimensional movements: horizontal, vertical and shear. Aluminum tops with optional installation of a nitrile leveling strip. Can be used for any type of finish: concrete, screed, tiles, etc.
Expansion Joints JHR 6.17
All metal floor joints
All Metal Seismic Ground Expansion Joint
MATERIAL:Â Aluminium
Stainless steel
COLOUR:Â Natural
MODEL:Â Flat and Angle
CHARACTERISTICS:
- All-metal floor expansion joint
- For opening joints up to 200
All-metal seismic ground expansion joint for exterior and interior consisting of 2 angles and a central part in aluminum or stainless steel allowing seismic expansion and contraction movements.
Fixings: contact us for recommendations.
Please consult us to check the use of the product with non-pneumatic wheeled machinery.
Expansion Joints JHR 6.16
All metal floor joints
Special Wide-Width Floor Expansion Joint
MATERIAL:Â Aluminium
COLOUR:Â Natural
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Seismic expansion joint
- Special for large widths
- For opening joints up to 250 mm
Seismic floor expansion joint for exterior and interior consisting of two angles and a thick central piece made of aluminum allowing significant expansion and contraction movements, as well as vertical and shear movements. Can be used for any type of finish: expansion joint for concrete, screed, tiles, etc. For indoor or outdoor floor joints up to 250 mm. Suitable for heavy light vehicle traffic.
Expansion Joints JHR 6.14
All metal floor joints
Heavy Duty Floor Expansion Joint
MATERIAL:Â Aluminium
COLOUR:Â Natural
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Reinforced seismic expansion joint
- Special for heavy loads and heavy duty
- For opening joints up to 200 mm
Seismic all-metal ground expansion joint specially designed to withstand heavy loads: handling equipment, trucks. Can be used indoors and outdoors. The center pieces allow for significant expansion and contraction movements, as well as vertical and shear movements. Can be used for any type of finish: expansion joint for concrete, screed, tiles, etc.
Expansion Joints JHR 6.12
Seismic expansion joints
All Metal Seismic Ground Expansion Joint
MATERIAL:Â Aluminium
COLOUR:Â Natural
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Seismic expansion joint
- Special for heavy loads and heavy duty
- For opening joints up to 110 mm
Seismic floor expansion joint for exterior and interior consisting of two aluminum angles and two central angles allowing expansion and contraction movements, as well as vertical and shear movements. Can be used for any type of finish: concrete, screed, tiles, etc.
Expansion Joints JHR 6.11
All metal floor joints
Floor Expansion Joint for Glued Tiles
MATERIAL:Â ALUMINIUM
COLOUR:Â NATURAL
MODEL:Â FLAT
CHARACTERISTICS:
- All-metal expansion joint for glued tiles
- Special for low heights
- For opening joints up to 40 mm
Special recessed floor expansion joint for low heights for glued tiles, stone and ceramics. Consisting of 2 aluminum angles, the JDH 6.11 allows expansion and contraction movements as well as vertical and shear movements. It is suitable for commercial buildings, hospitals, hotels, schools, etc.
Expansion Joints JHR 6.08
All metal floor joints
Aluminum Seismic Ground Expansion Joint
MATERIAL:Â Aluminium
COLOUR:Â Natural
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Seismic expansion joint
- Special for heavy loads and heavy duty
- For opening joints between 30 and 110 mm
All aluminum seismic floor expansion joint for exterior and interior. The two upper aluminium pieces slide between them, thus absorbing three-dimensional movements: horizontal, vertical and shear. Can be used for any type of finish: expansion joint for concrete, screed, tiles, etc. For indoor or outdoor floor joints up to 100 mm. Suitable for heavy traffic of wheeled forklifts, pallet trucks and heavy traffic of light vehicles.
Expansion Joints JHR 6.06
All metal floor joints
Aluminium profile for heavy loads and heavy duty
MATERIAL:Â Aluminium
COLOUR:Â Natural
MODEL:Â Flat and Angle
CHARACTERISTICS:
- Special for heavy loads and heavy duty
- Coverings: concrete, screed, tiles, etc.
- For 20 mm opening joints
Floor expansion joint for exterior and interior consisting of two angles and a central part in aluminium allowing expansion and contraction movements. Can be used for any type of finish: concrete, screed, tiles, etc. For indoor or outdoor floor joints up to 20 mm. Suitable for heavy traffic of tyred forklifts, trucks, pallet trucks and heavy light vehicle traffic.