Expansion Joints JHR 5.35
Parking Joints
Parking Floor Expansion Joint
MATERIAL: Rubber
Steel
COLOUR: Black
MODEL: FLAT
CHARACTERISTICS:
- Highly durable, suitable for heavy light vehicle traffic
- For opening joints up to 600 mm
- Reinforced with a steel plate and rubber finish
Floor expansion joints for car parks, access ramps, esplanades, and any other place with or without low-speed vehicle traffic. Widths available for openings up to 600 mm. Profile reinforced with a steel plate and rubber finish to absorb noise pollution due to passing vehicles.
Description
Shipping & Delivery
Related products
Expansion Joints JDH 5.06
Floor joints with insert
Special Wide-Width Floor Expansion Joint
MATERIAL: Aluminium
Nitrile
COLOUR: Black
Grey
RAL shades
MODEL: Flat and Angle
CHARACTERISTICS:
- Special wide-width floor expansion joint
- For opening joints from 100 to 200 mm
Floor expansion joint made of aluminium angles and a smooth interchangeable central flexible insert, black or grey (other colours on request) to absorb expansion movements. Can be used for any type of finish: expansion joint for concrete, screed, tiles, etc. For indoor or outdoor floor joints.
Expansion Joints JDV 4.07
Special Vertical Expansion Joint for Large Multidirectional Movements
Seismic Vertical Expansion Joint
MATERIAL: Aluminium
EPDM
COLOUR: Black
Grey
MODEL: Main course only
CHARACTERISTICS:
- Seismic expansion joint
- Vertical installation of façade, wall and ceiling
- For opening joints up to 600 mm
Vertical expansion joint for facades, walls and ceilings for opening joints up to 600 mm.
Allows you to absorb large multidirectional movements.
Expansion Joints JDV 4.04
Galvanized Steel Exterior and Interior Wall Expansion Joint
Steel expansion profile with nitrile insert
MATERIAL: Galvanized steel
Nitrile
COLOUR: Black
Grey
RAL shades
MODEL: Flat and Angle
CHARACTERISTICS:
- For 30 to 50 mm opening joints
- Laying under plaster
- Recessed vertical expansion joint
Vertical expansion joints in galvanized steel for facades, walls and ceilings composed of two pre-drilled recessed galvanized steel angles and an interchangeable flexible nitrile insert to absorb small multidirectional movements.
Expansion Joints Flexible Blanking Profile PSR
Flexible sealing profiles
MATERIAL: Nitrile
PVC
COLOUR: Black
Grey
RAL shades
MODEL: Main course only
CHARACTERISTICS:
- Cost-effective product, quick installation
- For non-circulatable horizontal and vertical joints
- For opening joints between 10 and 90 mm
Recessed flexible blanking profiles are ideal for the quick and economical construction of vertical joints, exterior or interior, or ceiling joints.
PSRs have a "cap" shaped upper part that provides coverage and hides any irregularities that the joint may have.
Expansion Joints PSO
Flexible sealing profiles
MATERIAL: Nitrile
COLOUR: Black
Grey
RAL shades
MODEL: Flat and Angle
CHARACTERISTICS:
- Cost-effective product, quick installation
- For non-circulatable horizontal and vertical joints
- For opening joints between 10 and 120 mm
Recessed flexible blanking profiles are ideal for the quick and economical construction of vertical joints, exterior or interior, or ceiling joints.
The PSO flexible profiles are installed, which allows for a quality finish. They can also be glued.
Expansion Joints Flexible Blanking Profile CP
Flexible sealing profiles
MATERIAL: Vulcanized thermoplastic
COLOUR: Black
MODEL: Dish only
CHARACTERISTICS:
- Cost-effective product, quick installation
- Hydrocarbon and UV resistant profiles
- For opening joints between 25 and 100 mm
Flexible vulcanised thermoplastic shutter profiles designed to be recessed into the floor and fixed with a special adhesive. The internal dimples support up to 50% of multidirectional movement, while maintaining enough lift to absorb traffic. Hydrocarbon and UV resistant profiles, which must be installed at least 5 mm below the running surface.
Expansion Joints GASKET COVER CJ Inox
Stainless steel joint covers
MATERIAL: Stainless steel
COLOUR: polished glossy | raw | grain leather | brush grit 220
MODEL: Flat
CHARACTERISTICS:
- Aesthetic, decorative and economical
- Easy and quick to install, without drilling or gluing
- For opening joints from 10 to 50 mm
Stainless steel clip-on joint covers are designed to protect and aesthetically clad the joints of facades, walls and ceilings. Easy and quick to install, they do not require drilling or gluing.
Expansion Joints GASKET COVER CJ Alu
Aluminum joint covers
MATERIAL: Aluminium
COLOUR: Natural
RAL shades
MODEL: Flat and Angle
CHARACTERISTICS:
- Aesthetic, decorative and economical
- Easy and quick to install, without drilling or gluing
- For opening joints from 10 to 120 mm
Aluminium clip-on joint covers are aesthetic, decorative and economical.
Easy and quick to install, without drilling or gluing, they have different clip models (S, SLL, XL or XXL) suitable for all joint openings from 10 to 120 mm.