Floor expansion joints for interior levels of car parks, access ramps and all other places with or without low-speed vehicle traffic. Consisting of a flexible nitrile insert to absorb dilation movements. Our JDH 5.305 is held in place by two drilled flanges milled in ribbed raw aluminium or galvanised steel or smooth stainless steel of varying dimensions. Special installation on finished floor.

Floor expansion joints for interior levels of car parks, access ramps and all other places with or without low-speed vehicle traffic. Consisting of a flexible nitrile insert to absorb dilation movements. Our JDH 5.30 is held in place by two drilled flanges milled in galvanized steel, ribbed raw aluminum or smooth stainless steel of variable thickness.

Waterproof floor expansion joint for special car parks with stainless steel or aluminium protection. Highly resistant to heavy vehicle traffic, chemical attacks, hydrocarbons, etc. Perfectly suited for car parks, access ramps, esplanades, and any other places with or without low speed light vehicle traffic requiring a watertight expansion joint. Weldable interchangeable insert. Available with short or long wings.

Extra-large seismic ground expansion joint consisting of angles and an aluminum center plate connected by two black flexible inserts to absorb expansion movements. Can be used for expansion joints up to 400 mm and for all types of finishes: slab, screed, tiles, etc.

Brass floor expansion joint composed of an interchangeable central flexible insert to absorb expansion movements. Can be used for any type of finish: concrete, screed, tiles, marble, etc. For indoor or outdoor floor joints up to 30 mm. Suitable for pedestrian and non-intensive light vehicle traffic.

Wide-width floor expansion joint for outdoor and indoor use made of aluminium angles and 2 interchangeable flexible nitrile inserts for any type of finish: expansion joint for slabs, screeds, tiles, etc.