Silt Fence
LS Trading is an Erosion control silt fence manufacturer in India. The company offer silt fences to help prevent soil erosion and water pollution. Our silt fence is made with high-quality polyethylene fabric and galvanized steel wires. The silt fence is easy to install, durable and can be customized to fit any size and shape of your site.
Our silt fences are used in construction sites, residential areas, and other areas that require soil erosion and water pollution control. Singhal Industries Private Limited also offer installation services along with the silt fences. We ensure that our silt fences are properly installed to ensure maximum efficiency.
The purpose of an Silt Fence is to hold the dirt on upset/disturbed lands, for example, a building/construction site, until the task is finished. Keeping the soil on-site, rather than letting it be washed off into natural water bodies (e.g., streams, rivers, ponds, lakes, estuaries), prevents the degradation of aquatic habitats and siltation of harbor channels. Not letting soil wash off onto roads and readily transporting it into storm drains prevents hazardous driving conditions and storm drains from getting clogged with sediment. It also controls silt which gets run-off from job sites, while allowing water to pass through the fabric while collecting leftover sediment.
The Environmental Protection Agency (EPA) has recognized the Silt fence installation as a storm-water best management practice (BMP). Silt Fence is profoundly practical as though you analyze the expense of introducing Silt Fence at watershed building destinations to the expenses related to losing amphibian species, digging route channels, and clearing dregs out of city storm sewers, which is excessively less. The cost of installing Silt fences on watershed construction sites is also too low compared to the cost of losing aquatic species, dredging navigation channels, and cleaning sediment out of municipal storm sewers. 50 tons of sediment can be held by installing a single 100 feet Silt fence.
Erosion control silt fences are a type of sediment control device used to help filter and trap sediment-laden water runoff before it enters natural water sources. The silt fence is typically made of a fabric material installed in a trench that runs across the area where erosion occurs.
The fabric material is then filled with earth or rocks to help act as an additional filter that traps sediment before entering the water source. These silt fences can be installed in areas such as construction sites, along highways, or in agricultural areas where erosion is a potential issue.
Features:
- Makes a physical boundary around the site
- UV stable dark fence texture
- Logo printing accessible
- Keep mud off roads and neighboring property
- Straightforward plan and straightforward establishment
- Ensure streams
- Holds silt on the place of work
- Channels overflow before leaving the site
- Assists with forestalling disintegration
- Accessible with or without stakes
- Preassembled fence with presents joined on texture
- Marker line on texture shows anchor profundity
Advantages:
- Forestall exorbitant place of work materials from depleting off
- Keep streets and streams liberated from contamination
- Light to medium quality woven textures
- Steel backing is likewise accessible for improved execution
- Endorsed for DOT use in numerous states
- Shield residue from leaving building locales
Shipping & Delivery
Applications
- Used along the borders of any task with upset land
- Used around naturally touchy territories
- Used underneath the toe or down incline of uncovered and erodible slants and other little cleared regions
- Used along streams and channels
- Used around impermanent ruin regions and reserves
Specification
- Material: 100% virgin PP
- Colour: Black, black/green, orange, blue
- Width: 10-800cm
- Length: As customer's requirements
- Mesh: 7*7-14*14
- Denier: 650D-2000D
- GSM: 60-230gsm
- Treatment: (1) UV treated, (2) Ultrasonic cutting or with selvage
- Surface Dealing: (1) Printing, (2) Anti-slip, Anti-static, or as per customer's requirements
Related products
PP Flute Board
Key Features
- Lightweight and easy to handle: Simplifies transportation and installation.
- High impact strength and durability: Ensures longevity and resistance to damage.
- Water and chemical resistance: Ideal for demanding environments.
- Recyclable and eco-friendly: Supports sustainable practices.
- Excellent printability: Perfect for high-quality signage and advertising.
- Thickness: Ranging from 2mm to 10mm to suit various requirements.
- Sizes: Fully customizable to meet specific project dimensions.
- Colors: A wide range of colors available upon request to match branding or aesthetic needs.
Weed Mat
We are a Weed Mat manufacturer and supplier made in India with high-quality materials such as woven polyethylene or polypropylene. It is used to suppress weed growth, prevent grass from growing, protect plant roots from sunlight, and provide necessary drainage to the soil below. The fabric in the weed mat allows adequate passage of water into the soil below. It helps in retaining and nourishing the moisture in the soil. It is lightweight and easy to install.
Weed mat, also known as landscape fabric, weed barrier, or weed control fabric, is a synthetic fabric that prevents weeds from growing in garden beds and landscaping areas. It is usually made of polypropylene or polyester and comes in various thicknesses and widths. Weed mat has many advantages over traditional weed control methods, such as tilling and mulching, as it is more effective and eliminates the need for herbicides. It is also more durable and can last up to 10 years.
It keeps the fertilizer goods and water from evaporating. It can effectively prevent the ground from producing weeds and keep the floor neat and clean. It is widely used in agriculture farms and home gardens. It helps to prevent the grass from growing unnecessarily and also protects from UV rays. We offer weed control mat in different weights, colours, widths, and lengths as per customer requirements and specifications.
Using chemicals to kill the weed can be an easier and more effective way, but it is not a healthy option. Garden weed barrier fabric is much in demand due to its non-toxic feature and it helps to grow the plant healthily. It prevents the growth of weeds and control soil moisture as well. It also protects plants during various weather conditions, helps in road surface protection, seedbed protection and it reduces herbicide usage. To grow plants or flower beds, they need a sufficient amount of water and nutrition. Due to unwanted weed, the growth of the plants or flower bed is affected badly, also destroying their existence. Hence garden weed mats play a vital role in stopping weeds from growing. And it is one of the best eco-friendly ways to protect the plants and flower beds from unwanted weeds. Hence before buying weed mats, you may measure the area properly, so that you can get the exact and perfect size for your application.
Our professionals are highly experienced and our quality testing team always ensures that weed control mat manufacturers to keeping in mind strict measures of quality control by following international standards. We maintain the highest quality of the Garden weed mat and provide the best service to our customers.
Features:
- Strong, durable and long lasting
- Prevents weeds growth in agriculture farms, nurseries, greenhouses, etc.
- UV resistance
- Boosts plant growth
- Water saving and reduces the use of herbicide
- Durable
- Air and water can pass easily
- Resistance against fungus and tears
- Prevents weed growth
- Strong tensile resistance
- Long term durability
- Prevents erosion
- Regulates temperature
- Soil stabilization
- Prevent grass growing in agricultural farm
- A cheap and appropriate way to prevent weed growth
- Environment friendly
- Non-toxic method to stop the growth of weed compared to chemical weed killer
Roofing Underlayment
We, LS Trading, are one of the leading and well-known manufacturers of Roof Underlayment produced with advanced technology. Roofing is an essential part of any property, and selecting the proper roof underlayment is crucial for any structure. The roof underlayment is designed in such a way for more strengthen the life and performance of any roof.
The primary role of roofing underlayment is to act as a barrier material providing resistance against water, wind, or any other severe weather conditions and providing extra protection to your roof. It is generally installed on the roof deck.
There are different types of Synthetic Roofing Underlayment like 1) Asphalt-saturated felt, 2) Synthetic underlayment, and 3) Rubberized asphalt underlayment. The first two are water resistant, and the third one is waterproof underlayment.
- Asphalt-saturated felt is described as felt paper and is made from organic; hence it is called an organic underlayment. It is generally applied throughout the roof deck and is recommended considering local weather conditions. It is used in residential and steep slope applications as it is water resistant and not waterproof.
- Rubberized Asphalt is a bit costly compared to the other two underlayments, as it has a good amount of asphalt and rubber polymers to build it waterproof and is more suitable in regions where it is severe winter. Such underlayment is used at Eaves, Valleys, and surfaces with low slope roofs.
- Finally, the most demandable roofing underlayment is roofing underlayment suppliers, also called non-bitumen synthetic underlayment. Synthetic roofing underlayment gives the roof an additional surface of safety that is not possible solely with shingles. It is lightweight and thin compared to asphalt felts. Moreover, the installation process is also very easy. It is a tough, durable, and high strength, designed in such a way that it prevents skidding and improves walkability during installation due to its unique textured fabric. It is resistant to moisture, UV damage, tears, leaks, and fungal growth and is wrinkle-free even when exposed to the elements. It is available in longer and wider rolls; hence it gets fewer trips up the ladder due to fewer rolls.
Our professional and highly experienced quality testing team always ensures that the Roofing Underlayment Exporters, keeping in mind strict measures of quality standards. To maintain the highest quality of the Roof Underlayment and provide the best service to our customers.
Features:- Stop water infiltration
- Extended UV Exposure
- Capture less heat
- Good resistance to water and vapor
- Tear and puncture resistance
- Slip resistance walking surface
- ISO authorized
- Tough and Durable Material
- Extreme weather protection
- Prevent from skidding during installation
- High temperature tolerance
- Water and fire resistant
- Wrinkle-free when exposed to the elements
- Simple and Quick Installation
- It won’t absorb water
- Increase job site productivity due to lighter rolls
- Does not require extra equipment
- Better leak protection
- More flexible in the cold
- Clean and easier to handle
- Enhance walkability and the life of roof due to unique textured fabric
- More coverage per roll
Drainage Cell
LS trading, a well-known manufacturers company in the world which provides the best Drainage cells. People call it by different names like drainage board, drainage mats, dimpled membrane, PP drainage mats, drainage plate, drainage cell mat, flo cell, etc. Drainage cell made with high high-strength interlocking panel system with 100% recycled polypropylene or virgin polypropylene.
It is very lightweight but can still hold up to 90 tonnes load. Due to lightweight & easy installation steps, heavy machines & technically skilled labour are not required. It is a three-dimensional geo-composite designed to provide the solution for sub-surface drainage systems, which helps in creating successful rooftop garden & planter boxes without any problem of cracking or leakage & it also works as an alternative for heavy aggregate drainage treatment. Excess water can be easily discharged out due to its uniform structure & void space, which helps to promote plant growth & helps to sustain a steady temperature on the wall surface. This drainage cell systems also controls water logging and decreases water pollutants.
Covering the drainage cell with non-woven fabrics helps water permeability and is used as a soak away system for rainwater from terraces, retaining walls, roof gardens, sports fields, basements etc. This drainage cell manufacturer board is also used to reduce hydrostatic pressure in-ground, reduce heat & cold, filtrate rainwater, and remove excess water.
Our professional, highly experienced quality testing team always ensures that drainage cell exporter, keeping in mind strict quality control measures by following international standards to maintain the highest quality and provide the best service to our customers.
Features:
- Highly durable
- Quick & easy to install
- Weather & chemical resistance
- Lightweight & easy to use
- Reliable performance
- Thermal regulation
- Water storage
- Resistance to puncture of plant roots
- Excellent drainage capacity
- Easily transportation
- Heat Insulation
- Water drainage
- High Compressive strength
- Waterproof polypropylene material
- Ventilation
- Cost effective
- Eco Friendly
- Helps water flow freely
- High flow rate
- Rapid & efficient drainage
- Versatile design can be fix horizontally or vertically
- Relieves hydrostatic pressure in the ground
- Strong structural design
- Long life expectancy
- Biologic resistant
- High Infiltration
- Preventing waterlogged ground
Rockshield Mesh
LS Trading is a well-known brand for manufacturing Rockshield Mesh. Rock shield is also called Rockshield Pipe Protection Net, pipeline net, pipeline protection mesh, rock shield mesh, and Rockshield Construction Net. The main role of Rockshield is to protect pipeline coating from rock backfills. It is manufactured from HDPE material and is available in 3-dimensional bi-planar high-strength extruded plastic mesh, mainly to protect the corrosion coating on pipelines laid in rocky terrain and rock backfills. It is applied in the shape of a diamond lattice structure.
This Rockshield mesh roll (a heavy-duty mesh) provides steady thickness all-round the width of each roll & protects pipeline coating from rock backfills. Its flexible mechanical protection padding acts as rock guard padding throughout the pipes during and after backfill operations. After installation, it protects the pipe by preventing damage by geologic movement. A Rockshield mesh price is necessary when pipelines are constructed near rocky shore as it protects the pipelines & it is flexible even at sub-zero temperatures.
It is used by many industries like Gas & oil pipeline, chemical industries, water industries, etc., as it is lightweight, flexible & easy to install, Impact & corrosion resistant, and cost-effective.
Our professional-quality team ensures that Rockshield Mesh manufacturers with strict quality control measures by following international standards to maintain the highest quality of the product & service to our customers.
Features:
- Apertures allow water flow
- Wear Resistance
- Corrosion Resistance
- Impact Resistance
- Tear Strength
- Elongation
- Tensile Strength
- Chemically inert
- Restrict geologic movements from damaging pipeline
- Minimizes impact and penetration damage
- Absorbs impact of uneven rock backfill
- Flexible event at sub-zero temperature
- Protects pipe coating from rock backfill
- Reduces abrasion of coating from pipe movement underground
- Protects pipeline during excavations
- Not influence by utmost temperature or wet weather
- Cushions against concrete weights
- Cuts with a utility knife
- Ample weight, thickness and strength protects pipeline
- No mechanical damage during backfilling operations
- Resistance to destructive forces
- Cost-effective alternative to sand collar
- Lightweight, flexible and easy to handle
- Minimizes pipeline coating damage which can cause corrosion
- Easy to install
- Provides pipeline & coating protection at affordable rate
- Maintains effectiveness of cathodic protection
- It will not Rot
- Protects pipe during loading, unloading & transportation
Plastic Tree Guard
LS Trading is a recognized and dependable plastics organization engaged in manufacturing, importing, and supplying various types of plastic netting and plastic films such as Extruded Plastic Nets, shade nets, tree guards, tree protectors, tree guard nets, polyethylene non-woven fabrics, reinforcement mesh, Plastic Tree Guard and packaging nets. Our products are in high demand among our customers due to their high quality, durability, and environmental friendliness.
We have become our client’s first choice for procuring our product line based on their requirements. LS Trading can manufacture our products following industry and client specifications with a solid infrastructure provide the best quality controllers which ensure the manufacturing and packaging unit.
Tree protection net is typically made of single-faced plastic, which protects the base of the trunk and keeps it dark, cool, and ideal for growth. Plastic sleeve tree guards are extremely simple because they are lightweight and highly customizable to any tree size. The obvious reason for using plastic tree protectors is to keep other wildlife out, such as rodents and rabbits. They also provide support during harsh weather conditions when young trees have weaker trunk strength; however, there are other important reasons to use plastic sleeve tree guards. The use of Tree protection net helps protect young or newly planted trees from winter sun damage caused by warm winter days followed by cold nights. Summer heat causes tree bark to expand, but freezing temperatures cause splitting. Regardless of the season, this splitting in the tree's bark can result in the burning or scalding of the newly exposed bark.
When properly installed, tree guards are most effective. When used with jute matting, they provide:
- UV protection.
- Protection from animals and bugs.
- Protection from wind damage.
- Protection from trampling/physical damage.
- Weed control.
- Made from recycled plastic
- Creates an ideal microclimate for young plant growth
- UV stabilized
- Scientifically proven to produce the best plant growth results
- Economical and cost-effective for large plantings
- Protects against spray drift and small animals
- Reusable for multiple planting seasons
- Common Sources of Tree Trunk Injury
- Rabbits and mice (like mice)
- Sun in the winter (sunscald, trunk splitting, etc.)
Plastic Carry Bags
LS Trading is a leading manufacturer and exporter of plastic carry bags, including retail carry bags, shopping plastic bags, and customized carry bags. We have a wide range of clients from over 80 countries worldwide, including India, the USA, the UK, Canada, Australia, and UAE.
We offer a wide range of plastic carry bag options to meet the diverse needs of our customers. Our product line includes:
-
- Plastic grocery bags: These bags are perfect for packaging and transporting groceries. They are made of clear plastic but partially translucent, and come in various sizes to accommodate objects of varying weights.
-
- Plastic shopping bags: These bags are a popular choice for retail stores and supermarkets. They are convenient for customers to carry their purchases and are often given out for free at the point of sale.
-
- Customized plastic carry bags: We offer custom printing options for our bags, allowing businesses to promote their company name and logo. These bags are perfect for marketing and advertising your business.
-
- Polyethylene Medium Density (MDPE): While not as transparent as Low-density Polyethylene (LDPE), medium-density polyethylene is less transparent than High-Density Polyethylene (HDPE). These bags typically have a higher strength than Plastic carry bag manufacturers but less flexibility. This kind of polyethylene is used on a significantly lesser level than HDPE and is often used for product packaging and disposal bags.
-
- Polyethylene Low Density (LDPE): Another popular polyolefin is low-density polyethylene (LDPE). These materials are either white or transparent when used to make bags. LDPE is frequently selected for consumer packaging when strength is not required, including bags for bread, paper, frozen meals, fresh fruit, clean clothing, etc. The material is transparent and shiny, and the bags used to make it are incredibly stretchable, flexible, and transparent. Additionally, they offer high moisture and wear resistance but only modest gas barrier qualities.
-
- Low-Density Polyethylene Linear (LLDPE): LLDPE or linear low-density polyethylene are similar in their properties and applications. LLDPE is preferred for various applications due to a few differences, though. In contrast to LDPE, which is often chosen for its greater clarity, ease of manufacturing, and better gloss, LLDPE is often chosen for its stronger compressive and impact strength and superior heat seal ability. Grocery, frozen food, waste, daily newspaper, and essential food bags are essential uses.
- Excellent Tensile strength
- Low water absorption
- Low-temperature resistance
- Good chemical stability and heat resistance
- Resistance to most alcohol, acid, and alkali
- Plastic bags are lightweight and thin.
- Flexible and versatile carrier bags
- Plastic Bag Packaging is Strong and Durable
- Plastic bags are a Budget-Friendly Alternative.
HDPE Duct Spacer
LS Trading manufacturer & exporter of HDPE Duct Spacer. It is a device used to maintain a fixed separation between multiple parallel conduits or ducts that are laid underground or on overhead structures. It is typically made of High-Density Polyethylene (HDPE) material which is known for its high strength, durability, and resistance to corrosion.
HDPE Duct Spacer is designed to support and protect the conduits from damage caused by external forces such as soil movement, seismic activity, and traffic loads. It also prevents friction between the conduits and reduces the risk of damage caused by the rubbing of the pipes.
The HDPE Duct Spacer is available in different shapes, sizes, and configurations to suit various conduit arrangements. Some designs allow for easy installation and removal of the Duct spacer price, while others provide a more permanent solution.
Overall, the HDPE Duct Spacer supplier is an essential component of any modern conduit installation, as it ensures that the conduits are correctly positioned, secured, and protected from damage, thus enhancing the overall longevity and reliability of the conduit system.
Features:
- Material: HDPE Duct Spacer is made from high-density polyethylene (HDPE), which is known for its excellent strength, durability, and resistance to environmental factors like UV rays, chemicals, and moisture.
- Design: The spacer is designed to maintain a constant separation between multiple conduits or ducts, which reduces the risk of damage from external factors like soil movement, seismic activity, and traffic loads. It also prevents friction between the conduits, reducing the risk of damage caused by rubbing.
- Easy Installation: The spacer is designed for easy installation, with most models featuring snap-on or clip-on designs that allow them to be easily installed and removed without the need for specialized tools.
- Longevity: Duct Bank Spacer has a long service life and requires minimal maintenance, making it a cost-effective solution for conduit installations.
- Durability: It is made from a high-density polyethylene material, which is known for its strength and durability. This material is resistant to impact, abrasion, and weathering, making it ideal for use in harsh environments.
- Corrosion Resistance: HDPE Duct Spacer is highly resistant to corrosion, which makes it an ideal material for use in underground and overhead installations.
- Easy Installation: It is designed for easy installation, with most models featuring snap-on or clip-on designs that allow them to be easily installed and removed without the need for specialized tools.
- Versatility: HDPE Duct Spacer is available in a variety of shapes, sizes, and configurations to suit different conduit arrangements. Some designs allow for easy adjustment of spacing between the conduits, while others provide a more permanent solution.
- Cost-effective: It is a cost-effective solution for maintaining separation between multiple conduits and ducts, protecting them from damage, and ensuring the longevity and reliability of conduit systems.
- Environmentally friendly: HDPE Duct Spacer is an environmentally friendly material, as it is made from a non-toxic and recyclable material.