Silt Fence
LS Trading is an Erosion control silt fence manufacturer in India. The company offer silt fences to help prevent soil erosion and water pollution. Our silt fence is made with high-quality polyethylene fabric and galvanized steel wires. The silt fence is easy to install, durable and can be customized to fit any size and shape of your site.
Our silt fences are used in construction sites, residential areas, and other areas that require soil erosion and water pollution control. Singhal Industries Private Limited also offer installation services along with the silt fences. We ensure that our silt fences are properly installed to ensure maximum efficiency.
The purpose of an Silt Fence is to hold the dirt on upset/disturbed lands, for example, a building/construction site, until the task is finished. Keeping the soil on-site, rather than letting it be washed off into natural water bodies (e.g., streams, rivers, ponds, lakes, estuaries), prevents the degradation of aquatic habitats and siltation of harbor channels. Not letting soil wash off onto roads and readily transporting it into storm drains prevents hazardous driving conditions and storm drains from getting clogged with sediment. It also controls silt which gets run-off from job sites, while allowing water to pass through the fabric while collecting leftover sediment.
The Environmental Protection Agency (EPA) has recognized the Silt fence installation as a storm-water best management practice (BMP). Silt Fence is profoundly practical as though you analyze the expense of introducing Silt Fence at watershed building destinations to the expenses related to losing amphibian species, digging route channels, and clearing dregs out of city storm sewers, which is excessively less. The cost of installing Silt fences on watershed construction sites is also too low compared to the cost of losing aquatic species, dredging navigation channels, and cleaning sediment out of municipal storm sewers. 50 tons of sediment can be held by installing a single 100 feet Silt fence.
Erosion control silt fences are a type of sediment control device used to help filter and trap sediment-laden water runoff before it enters natural water sources. The silt fence is typically made of a fabric material installed in a trench that runs across the area where erosion occurs.
The fabric material is then filled with earth or rocks to help act as an additional filter that traps sediment before entering the water source. These silt fences can be installed in areas such as construction sites, along highways, or in agricultural areas where erosion is a potential issue.
Features:
- Makes a physical boundary around the site
- UV stable dark fence texture
- Logo printing accessible
- Keep mud off roads and neighboring property
- Straightforward plan and straightforward establishment
- Ensure streams
- Holds silt on the place of work
- Channels overflow before leaving the site
- Assists with forestalling disintegration
- Accessible with or without stakes
- Preassembled fence with presents joined on texture
- Marker line on texture shows anchor profundity
Advantages:
- Forestall exorbitant place of work materials from depleting off
- Keep streets and streams liberated from contamination
- Light to medium quality woven textures
- Steel backing is likewise accessible for improved execution
- Endorsed for DOT use in numerous states
- Shield residue from leaving building locales
Shipping & Delivery
Applications
- Used along the borders of any task with upset land
- Used around naturally touchy territories
- Used underneath the toe or down incline of uncovered and erodible slants and other little cleared regions
- Used along streams and channels
- Used around impermanent ruin regions and reserves
Specification
- Material: 100% virgin PP
- Colour: Black, black/green, orange, blue
- Width: 10-800cm
- Length: As customer's requirements
- Mesh: 7*7-14*14
- Denier: 650D-2000D
- GSM: 60-230gsm
- Treatment: (1) UV treated, (2) Ultrasonic cutting or with selvage
- Surface Dealing: (1) Printing, (2) Anti-slip, Anti-static, or as per customer's requirements
Related products
PP Flute Board
Key Features
- Lightweight and easy to handle: Simplifies transportation and installation.
- High impact strength and durability: Ensures longevity and resistance to damage.
- Water and chemical resistance: Ideal for demanding environments.
- Recyclable and eco-friendly: Supports sustainable practices.
- Excellent printability: Perfect for high-quality signage and advertising.
- Thickness: Ranging from 2mm to 10mm to suit various requirements.
- Sizes: Fully customizable to meet specific project dimensions.
- Colors: A wide range of colors available upon request to match branding or aesthetic needs.
Ground Covers
We are leading manufacturers at LS Trading, present with our quality products. It exports premium quality, highly durable Ground Covers manufactured by us using the best grade of thermoplastic material, i.e., Polypropylene. Ground cover is the best solution to lure moisture into the soil. It also helps restrict weed growth by allowing the water to pass through.
Ground cover is a type of plant that grows low to the ground and helps to hold soil in place, reduce weeds, and create a colourful landscape. They are low–maintenance and well–suited to many types of terrain. There are several types of ground cover plants, including perennials, evergreens, and annuals.
Ground covers are specially designed to allow water to penetrate into the soil, ensuring that the crops get proper sunlight and at the same time restricting insects and protecting them without damaging wildlife. The said Ground Cover is manufactured by weaving the Polypropylene tapes together. They possess great strength and are highly durable. We offer HDPE ground cover mats that last for long life in direct heat and sunlight.
HDPE Ground cover mats manufacturer plants have shallow root systems, which helps them to spread quickly and fill in areas quickly. Ground cover can be used to cover large areas such as slopes, hills, and banks, as well as small areas such as rock gardens and pathways.
Ground Cover usually has marker lines every 12" for proper plant alignment. It helps retain the soil's moisture and maintains the soil temperature. These covers are flexible in application and used in landscape situations for insect protection, weed control, temperature control, frost prevention, etc. Ground covers are the best choice for horticultural applications and aesthetic appearances. They are available in different weights, colors, widths, and lengths. These covers resist tearing, puncturing, and weed penetration, saving time and money! Ground covers can be used in varied applications depending on your choices.
These woven black polypropylene HDPE Ground Cover Mats supplier are stabilized using an ultraviolet stabilizer which acts as the perfect weed barrier for planting areas while still allowing moisture to pass through your vegetables and plants. UV stability and UV retention are obtained with the help of circular loom fabric. Our Ground Cover Fabric is the best solution for your landscaping ventures.
Features:
- Very effective in blocking weeds and soil erosion
- Due to its water-absorbent quality, it allows the soil to breathe.
- Prevents soil/land washout due to rainfall
- Used for 100% chemical-free weed control
- Having high tensile strength
- Highly durable
- Tough and tear-resistant
- Highly resistant to UV & chemicals and mildew
- Provides cost-effective covering
- Long-lasting and optimum quality
- Lightweight
- Easy to maintain and clean
- Our manufactured woven Ground Covers are sturdy and durable, having a life expectancy of 5+ years.
- Our ground covers are available in square marking lines, and stripes, which can be customized per the customer’s requirement.
- Our manufactured fabric is treated with UV stabilizers that provide a longer life to the end product.
- Our Ground Covers have specific green lines over the fabric, making overlapping easier.
- 100% chemical-free weed control
- Prevents/blocks weed growth
- Time saver in maintaining flower beds
- It has many Beautifies the landscape as the plants can be planted in straight parallel lines for neat and clean landscaping in nurseries and farms.
- Our Ground Covers are UV stabilized and can be used multiple times.
- Having good resistance to mildew, bacteria, and other ground/soil insects
- Possess long-term durability
- It prevents soil and land erosion to an extent.
- Good in regulating temperature in all weather conditions
- Stabilizes land and soil to an extent
- It can be reused over many seasons.
Weed Mat
We are a Weed Mat manufacturer and supplier made in India with high-quality materials such as woven polyethylene or polypropylene. It is used to suppress weed growth, prevent grass from growing, protect plant roots from sunlight, and provide necessary drainage to the soil below. The fabric in the weed mat allows adequate passage of water into the soil below. It helps in retaining and nourishing the moisture in the soil. It is lightweight and easy to install.
Weed mat, also known as landscape fabric, weed barrier, or weed control fabric, is a synthetic fabric that prevents weeds from growing in garden beds and landscaping areas. It is usually made of polypropylene or polyester and comes in various thicknesses and widths. Weed mat has many advantages over traditional weed control methods, such as tilling and mulching, as it is more effective and eliminates the need for herbicides. It is also more durable and can last up to 10 years.
It keeps the fertilizer goods and water from evaporating. It can effectively prevent the ground from producing weeds and keep the floor neat and clean. It is widely used in agriculture farms and home gardens. It helps to prevent the grass from growing unnecessarily and also protects from UV rays. We offer weed control mat in different weights, colours, widths, and lengths as per customer requirements and specifications.
Using chemicals to kill the weed can be an easier and more effective way, but it is not a healthy option. Garden weed barrier fabric is much in demand due to its non-toxic feature and it helps to grow the plant healthily. It prevents the growth of weeds and control soil moisture as well. It also protects plants during various weather conditions, helps in road surface protection, seedbed protection and it reduces herbicide usage. To grow plants or flower beds, they need a sufficient amount of water and nutrition. Due to unwanted weed, the growth of the plants or flower bed is affected badly, also destroying their existence. Hence garden weed mats play a vital role in stopping weeds from growing. And it is one of the best eco-friendly ways to protect the plants and flower beds from unwanted weeds. Hence before buying weed mats, you may measure the area properly, so that you can get the exact and perfect size for your application.
Our professionals are highly experienced and our quality testing team always ensures that weed control mat manufacturers to keeping in mind strict measures of quality control by following international standards. We maintain the highest quality of the Garden weed mat and provide the best service to our customers.
Features:
- Strong, durable and long lasting
- Prevents weeds growth in agriculture farms, nurseries, greenhouses, etc.
- UV resistance
- Boosts plant growth
- Water saving and reduces the use of herbicide
- Durable
- Air and water can pass easily
- Resistance against fungus and tears
- Prevents weed growth
- Strong tensile resistance
- Long term durability
- Prevents erosion
- Regulates temperature
- Soil stabilization
- Prevent grass growing in agricultural farm
- A cheap and appropriate way to prevent weed growth
- Environment friendly
- Non-toxic method to stop the growth of weed compared to chemical weed killer
Drainage Cell
LS trading, a well-known manufacturers company in the world which provides the best Drainage cells. People call it by different names like drainage board, drainage mats, dimpled membrane, PP drainage mats, drainage plate, drainage cell mat, flo cell, etc. Drainage cell made with high high-strength interlocking panel system with 100% recycled polypropylene or virgin polypropylene.
It is very lightweight but can still hold up to 90 tonnes load. Due to lightweight & easy installation steps, heavy machines & technically skilled labour are not required. It is a three-dimensional geo-composite designed to provide the solution for sub-surface drainage systems, which helps in creating successful rooftop garden & planter boxes without any problem of cracking or leakage & it also works as an alternative for heavy aggregate drainage treatment. Excess water can be easily discharged out due to its uniform structure & void space, which helps to promote plant growth & helps to sustain a steady temperature on the wall surface. This drainage cell systems also controls water logging and decreases water pollutants.
Covering the drainage cell with non-woven fabrics helps water permeability and is used as a soak away system for rainwater from terraces, retaining walls, roof gardens, sports fields, basements etc. This drainage cell manufacturer board is also used to reduce hydrostatic pressure in-ground, reduce heat & cold, filtrate rainwater, and remove excess water.
Our professional, highly experienced quality testing team always ensures that drainage cell exporter, keeping in mind strict quality control measures by following international standards to maintain the highest quality and provide the best service to our customers.
Features:
- Highly durable
- Quick & easy to install
- Weather & chemical resistance
- Lightweight & easy to use
- Reliable performance
- Thermal regulation
- Water storage
- Resistance to puncture of plant roots
- Excellent drainage capacity
- Easily transportation
- Heat Insulation
- Water drainage
- High Compressive strength
- Waterproof polypropylene material
- Ventilation
- Cost effective
- Eco Friendly
- Helps water flow freely
- High flow rate
- Rapid & efficient drainage
- Versatile design can be fix horizontally or vertically
- Relieves hydrostatic pressure in the ground
- Strong structural design
- Long life expectancy
- Biologic resistant
- High Infiltration
- Preventing waterlogged ground
Plastic Tree Guard
LS Trading is a recognized and dependable plastics organization engaged in manufacturing, importing, and supplying various types of plastic netting and plastic films such as Extruded Plastic Nets, shade nets, tree guards, tree protectors, tree guard nets, polyethylene non-woven fabrics, reinforcement mesh, Plastic Tree Guard and packaging nets. Our products are in high demand among our customers due to their high quality, durability, and environmental friendliness.
We have become our client’s first choice for procuring our product line based on their requirements. LS Trading can manufacture our products following industry and client specifications with a solid infrastructure provide the best quality controllers which ensure the manufacturing and packaging unit.
Tree protection net is typically made of single-faced plastic, which protects the base of the trunk and keeps it dark, cool, and ideal for growth. Plastic sleeve tree guards are extremely simple because they are lightweight and highly customizable to any tree size. The obvious reason for using plastic tree protectors is to keep other wildlife out, such as rodents and rabbits. They also provide support during harsh weather conditions when young trees have weaker trunk strength; however, there are other important reasons to use plastic sleeve tree guards. The use of Tree protection net helps protect young or newly planted trees from winter sun damage caused by warm winter days followed by cold nights. Summer heat causes tree bark to expand, but freezing temperatures cause splitting. Regardless of the season, this splitting in the tree's bark can result in the burning or scalding of the newly exposed bark.
When properly installed, tree guards are most effective. When used with jute matting, they provide:
- UV protection.
- Protection from animals and bugs.
- Protection from wind damage.
- Protection from trampling/physical damage.
- Weed control.
- Made from recycled plastic
- Creates an ideal microclimate for young plant growth
- UV stabilized
- Scientifically proven to produce the best plant growth results
- Economical and cost-effective for large plantings
- Protects against spray drift and small animals
- Reusable for multiple planting seasons
- Common Sources of Tree Trunk Injury
- Rabbits and mice (like mice)
- Sun in the winter (sunscald, trunk splitting, etc.)
Spout Pouch
| Products Details | Classification |
|---|---|
| Bag Style | Stand Up, Flat Bottom, Side Gusset, Shaped Bag |
| Base Material | PET ( Polyester), LDPE, Aluminium |
| Pouch Size | Customized sizes available |
| Pouch Pattern | Plain & Printed |
| Color | Transparent, Single & Multi-Color |
| Thickness | 51 microns onwards |
| Sealing & Handle | Spout Top |
HDPE Duct Coupler
LS Trading manufacturer, exporter & supplier of HDPE Duct Coupler. A PE duct coupler, also known as a polyethylene duct coupler, is a type of fitting that is used to connect two pieces of polyethylene ductwork. Polyethylene ductwork is a popular choice for underground ducting and piping applications due to its flexibility, durability, and resistance to corrosion.
PE duct couplers are typically made from high-density polyethylene (HDPE) material, which is known for its high strength and resistance to abrasion, chemicals, and weathering. They are available in a range of sizes, ranging from small diameters of 20mm up to large diameters of 630mm or more.
HDPE duct coupler are designed to connect two pieces of polyethylene ductwork together in a secure and leak-free manner. They have a simple design consisting of two cylindrical pieces, one of which has a slightly larger diameter than the other. The larger piece is inserted over the end of one piece of ductwork, while the smaller piece is inserted over the end of the other piece of ductwork. The two pieces are then pushed together and secured in place with a locking mechanism, typically a clamp or a compression fitting.
Using a PE (polyethylene) duct coupler supplier is a relatively simple process that can be done with a few basic tools. Here are the steps to follow:
- First, ensure that the ends of the ducting or pipe that you want to connect with the coupler are clean and free of debris or rough edges.
- Slide the PE duct coupler over one end of the ducting or pipe until it reaches the center of the coupler. Make sure that the coupler is aligned properly with the end of the ducting or pipe.
- Repeat step 2 with the other end of the ducting or pipe, sliding it into the other side of the duct coupler price until it reaches the center.
- Use a wrench or pliers to tighten the coupler's grip on both ends of the ducting or pipe. This will ensure a tight and secure connection.
- If necessary, use a sealant or adhesive to create an airtight or watertight seal between the ducting or pipe and the coupler.
- Finally, test the connection to ensure that it is secure and leak-free.
- High Strength: HDPE duct couplers are made from high-density polyethylene, which is a strong and durable material. This means that they are able to withstand heavy loads and pressures, making them ideal for use in underground applications.
- Chemical Resistance: HDPE is highly resistant to a wide range of chemicals, including acids, alkalis, and solvents. This makes it ideal for use in industries where exposure to harsh chemicals is common.
- UV Resistance: HDPE duct couplers are also highly resistant to UV radiation, which can cause other materials to degrade and break down over time. This makes HDPE an ideal choice for outdoor applications where exposure to sunlight is a concern.
- Corrosion Resistance: Unlike metal couplers, HDPE duct couplers are highly resistant to corrosion. This makes them ideal for use in underground applications where moisture and soil can cause metal components to rust and deteriorate over time.
- Flexibility: HDPE is a flexible material, which means that it can bend and flex without breaking. This makes HDPE duct couplers ideal for use in applications where flexibility is a concern, such as in telecommunications and electrical conduits.
- Easy Installation: HDPE duct couplers are easy to install and require no special tools or equipment. They can be installed quickly and easily by one person, which can save time and money on installation costs.
- Leak-Free: HDPE duct couplers are designed to create a tight, leak-free seal between two or more sections of ductwork. This helps to prevent leaks and other issues that can cause damage to underground utilities and infrastructure.
- Wide Range of Sizes: HDPE duct couplers are available in a wide range of sizes, from small diameters of 20mm up to large diameters of 630mm or more. This makes them suitable for use in a variety of applications, from residential and commercial plumbing to large-scale industrial piping systems.
- Durability: HDPE duct couplers are made from high-density polyethylene, which is a durable and long-lasting material. This means that they are able to withstand heavy loads and pressures, making them ideal for use in underground applications.
- High Strength: HDPE duct couplers are made from high-density polyethylene, which is a strong and durable material. This means that they are able to withstand heavy loads and pressures, making them ideal for use in underground applications.
- Easy Installation: HDPE duct couplers are easy to install and require no special tools or equipment. They can be installed quickly and easily by one person, which can save time and money on installation costs.
- Low Maintenance: HDPE duct couplers require very little maintenance and are designed to last for many years without the need for replacement or repairs. This can help to reduce maintenance costs and downtime for businesses and organizations.
PP Spunbond Nonwoven Fabric
Polypropylene spun-bond non woven fabric is a type of non woven material made from polypropylene (PP) fibres. It is produced using a process called spun-bond technology, which involves extruding molten polymer through fine nozzles to create continuous filaments that are then laid down in a random pattern onto a moving conveyor belt. The resulting web of fibres is then bonded together using heat, pressure, or chemicals, without the use of weaving or knitting.
Polypropylene spun-bond non woven fabric is made of 100% polypropylene fibre, which is extruded and spun to form a web of randomly-oriented, continuous filaments. The web is then subjected to a thermal bonding process to create a non woven fabric.
Polypropylene spun-bond non woven fabric is a kind of non woven fabric created from polypropylene (PP) yarns. It is created utilizing a procedure which is named the spun-bond procedure, which pertains to extruding molten polymer through fine nozzles to develop endless filaments that are then laid down in a random design onto a moving conveyor belt. The resulting web of yarns is then connected utilizing heat, pressure, or chemicals, without the usage of intertwining or knitting.
When you want to buy this type of bag then always want the best LS Trading is the best and famous player in this field. They also distribute their products outside India and in United States, United Kingdom, Australia, Canada and United Arab Emirates.
Polypropylene Spunbond non-woven fabric is typically made from polypropylene, a type of plastic that is not biodegradable. However, we do manufacturers use biodegradable materials, such as polylactic acid (PLA), to make PP spunbond non-woven fabric supplier.
In general, spunbond non-woven fabric made from polypropylene is not biodegradable and can take hundreds of years to break down in the environment. However, it is recyclable in some cases. On the other hand, PP spunbond nonwoven fabric made from biodegradable materials such as PLA can break down more quickly in the environment. However, it is important to note that biodegradable materials require specific conditions, such as high temperatures and microbial activity, to break down properly.
Features:
- High Strength: It has high tensile strength, tear strength and bursting strength, making it suitable for heavy-duty applications.
- Breathable: The fabric has excellent air permeability, making it breathable and comfortable to wear.
- Water-resistant: It has good water resistance, making it suitable for use in products that are exposed to moisture.
- Chemical-resistant: The fabric is resistant to a wide range of chemicals, making it suitable for use in harsh environments.
- Anti-static: It has anti-static properties, making it suitable for use in electronic and other industries where static electricity is a concern.
- Easy to clean: The fabric is easy to clean and maintain, which makes it suitable for use in products that require frequent washing.
- Lightweight: It is very lightweight, making it easy to handle and transport.
- Softness: This type of fabric is also very soft and comfortable to wear, making it ideal for use in clothing and bedding.
- Cost-effective: It is an affordable alternative to traditional woven fabrics, making it an attractive option for manufacturers looking to reduce costs while maintaining quality.
- Recyclable: The fabric is recyclable, making it an environmentally friendly option.
- Non-toxic: The fabric is non-toxic, making it safe for use in medical and other sensitive applications.